• <menuitem id="rd7fm"></menuitem>
      <tbody id="rd7fm"><div id="rd7fm"></div></tbody>
        1. <tbody id="rd7fm"></tbody>
        2. <bdo id="rd7fm"><optgroup id="rd7fm"><thead id="rd7fm"></thead></optgroup></bdo>
            <track id="rd7fm"></track>

            不锈钢球自动焊接机

            分享到微信

            ×

            请使用浏览器的分享功能
            分享到微信

            产品详情

            1、可通过更换工装实现多种直径的不锈钢半圆球自动焊接成圆球。

            2、当半圆球尺寸精度有细微差异时,可根据CCD拍摄的影像自动调节X、Y、Z方向氩弧焊焊枪的位置。

            3、焊枪由铝合金支架固定,X、Y、Z三个方向由伺服电机及丝杆控制,焊枪支架可以90°自由旋转,使焊枪能够在垂直位置和水平位置以及中间任意角度进行调整和固定。

            4、自动焊接模式下,焊枪能够重复自动定位;手动焊接模式下,焊枪能够在X、Y、Z方向通过单独的旋钮开关进行微调控制,伺服电机有上下限位保护,移动速度可调整。

            5、通过触摸屏对所有参数进行调节,由PLC程序控制焊机电源的开关、焊枪位置的调整、卡盘转速以及焊接时间。





            1.The stainless steel semi-circular ball with various diameters can be automatically welded into a round ball by changing the tooling.

            2.When there is a slight difference in the size accuracy of semi-circular ball, the position of argon arc welding torch in x, y and z directions can be automatically adjusted according to the image taken by CCD.

            3.The welding gun is fixed by aluminum alloy bracket. The x, y and z directions are controlled by servo motor and screw rod. The welding gun bracket can rotate freely at 90°to adjust and fix the welding gun in vertical position, horizontal position and any angle in the middle.

            4.In the automatic welding mode, the welding gun can perform the automatic positioning repeatedly; in the manual welding mode, the welding gun can be fine-tuning controlled by a separate knob switch in the x, y, z directions; at the same time, the servo motor has upper and lower limit protection, and the moving speed can be adjusted.

            5.All parameters are adjusted by touch screen. PLC program controls the power switch of welding machine, adjustment of welding torch position, chuck speed and welding time.

            不锈钢球自动焊接机

            分享到微信

            ×

            请使用浏览器的分享功能
            分享到微信

            可通过更换工装实现多种直径的不锈钢半圆球自动焊接成圆球。
            021-37639826
            产品详情

            1、可通过更换工装实现多种直径的不锈钢半圆球自动焊接成圆球。

            2、当半圆球尺寸精度有细微差异时,可根据CCD拍摄的影像自动调节X、Y、Z方向氩弧焊焊枪的位置。

            3、焊枪由铝合金支架固定,X、Y、Z三个方向由伺服电机及丝杆控制,焊枪支架可以90°自由旋转,使焊枪能够在垂直位置和水平位置以及中间任意角度进行调整和固定。

            4、自动焊接模式下,焊枪能够重复自动定位;手动焊接模式下,焊枪能够在X、Y、Z方向通过单独的旋钮开关进行微调控制,伺服电机有上下限位保护,移动速度可调整。

            5、通过触摸屏对所有参数进行调节,由PLC程序控制焊机电源的开关、焊枪位置的调整、卡盘转速以及焊接时间。





            1.The stainless steel semi-circular ball with various diameters can be automatically welded into a round ball by changing the tooling.

            2.When there is a slight difference in the size accuracy of semi-circular ball, the position of argon arc welding torch in x, y and z directions can be automatically adjusted according to the image taken by CCD.

            3.The welding gun is fixed by aluminum alloy bracket. The x, y and z directions are controlled by servo motor and screw rod. The welding gun bracket can rotate freely at 90°to adjust and fix the welding gun in vertical position, horizontal position and any angle in the middle.

            4.In the automatic welding mode, the welding gun can perform the automatic positioning repeatedly; in the manual welding mode, the welding gun can be fine-tuning controlled by a separate knob switch in the x, y, z directions; at the same time, the servo motor has upper and lower limit protection, and the moving speed can be adjusted.

            5.All parameters are adjusted by touch screen. PLC program controls the power switch of welding machine, adjustment of welding torch position, chuck speed and welding time.

            国产对白叫床清晰在线播放